Services About Why Us Sectors Store Get a Quote

Fire Alarms for Schools

Fire detection and alarm systems for primary and secondary schools across Essex and Thurrock, designed to BS 5839-1:2025 and each site's fire risk assessment.

Schools

Fire detection designed for how the school runs

A school fire alarm has to do two jobs at once: give a clear warning that staff and pupils can act on, and stay usable every week when the premises team test it. We design, install and service systems to BS 5839-1:2025, the current code of practice for non-domestic buildings.

Your fire risk assessment sets the level of cover. A competent person must design, commission and sign the system off. We support the weekly test, carry out six-monthly servicing, and write every visit in the logbook. See also our wider fire alarm and fire alarm installation in Essex pages.

Book a school site survey
Fire alarm panel installed by Charged Services
What We Install

School fire alarms and detection

What we install and maintain for schools.

Addressable systems

On larger or multi-block schools we usually install an addressable fire alarm, so the panel can show which device has operated and staff can go straight to the right place.

Conventional systems

A conventional system can be the right fit on a smaller or simpler school building. We recommend one or the other at the survey, based on the fire risk assessment and the layout.

Wireless where cabling is hard

Wireless devices are useful in listed or awkward fabric, and in blocks where cabling would close teaching spaces for too long. They are still designed to BS 5839-1:2025.

Call points, detection and warning

Manual call points, detectors and sounders or visual indicators are placed to the level of cover set by the fire risk assessment, including halls used out of hours.

Weekly tests and servicing

We show premises staff how to run the weekly test, and a competent engineer services the system at six-monthly intervals, with everything written in the logbook.

Takeover and upgrades

If another company installed the system, we can inspect it, tell you what we find, and take on the servicing or an upgrade if you want us to.

Emergency lighting

Emergency lighting can be tested on the same visit as the fire alarm, so the premises team has one engineer and one report. See emergency lighting.

Planned with doors and gates

Escape doors and powered gates need a competent design so they behave correctly when the fire alarm operates. We plan that with the access control and gate work.

Design and Sign-off

Designed to BS 5839-1:2025

We design and install to BS 5839-1:2025. We do not sign a system off as a paper exercise: a competent person must design, commission and sign it off, and the fire risk assessment for that building sets the level of cover. Categories, device types and whether the system is conventional, addressable or wireless are decisions we talk through on the survey, in plain English.

Related reading: fire alarm installation in Essex, fire alarm servicing and fire alarm takeovers.

Schools We Cover

Schools we cover

School Fire Alarms by town: Brentwood, Chelmsford, Billericay, Basildon, Rayleigh, Thurrock, Southend-on-Sea.

Whole Site

One contractor for the whole site

Gates, doors, cameras and fire systems work better when they are planned together.

Access control for schools

Paxton fobs, intercoms and lockdown. See access control for schools.

CCTV for schools

Safeguarding-focused cameras with privacy built in. See CCTV for schools.

School gates

Automated gates with non-contact safety and full records. See school gates and our gate safety rules for schools.

Door entry for schools

Video intercoms at reception and visitor release from the desk. See door entry for schools.

IT and network integration

Gates, door controllers, intercoms and cameras all depend on the school network. We plan them with your IT team or provider, keep security devices on their own network segment and run the data cabling and WiFi ourselves, so one team owns the whole job.

Maintenance and Records

Maintenance and records

Every visit is written in the logbook: devices tested, faults found, work done and any follow-up. You get a copy for the premises file, so the system's history is ready when the trust, insurer or fire risk assessor asks for it. We hold CSCS cards, SafeContractor accreditation, ISO 9001 certification and enhanced DBS clearance. See our accreditations.

See how this works on real school sites: our primary school gates in Ilford and secondary school gates in Stanmore case studies.

FAQs

School Fire Alarms questions

Common questions from school business managers, premises teams and headteachers.

A competent engineer should service it at six-monthly intervals. Site staff should test it each week, and both should be written in the logbook.

Yes. We design and install fire detection and alarm systems to BS 5839-1:2025, the current code of practice for non-domestic buildings. A competent person must design, commission and sign the system off. Your fire risk assessment sets the level of cover.

Yes. We inspect the panel, devices and records, tell you what we find, and then service or upgrade it if you want us to take it on.

Yes. We can test and maintain emergency lighting on the same visit as the fire alarm, so the premises team has one engineer and one report. See emergency lighting.

Escape doors can be set to release when the fire alarm operates, as part of a competent design. We plan that with the access control and fire work so the two systems work together.

Yes, plus nurseries, sixth forms and academy sites. The design follows the fire risk assessment for that building, not a one-size system.

Secure your school

Get in touch to discuss your requirements and arrange a free site survey.