Services About Why Us Sectors Store Get a Quote

Electric Gates in Colchester

Electric, sliding and driveway gate installation, repairs and servicing for homes and businesses in Colchester, Lexden, Stanway, Highwoods, Wivenhoe and Mile End.

Colchester

Electric gates for Colchester and north Essex

Colchester is a town of contrasts when it comes to gates. Tree-lined Victorian and Edwardian roads in Lexden sit a short drive from newer estates in Highwoods and Mile End, and from the trade parks and yards around Stanway. The gate that suits one of these is rarely right for another.

We install, repair and service electric gates for homes, flats and business sites across Colchester, Lexden, Stanway, Highwoods, Wivenhoe, Mile End and the villages nearby. That means new swing, sliding and cantilever gates, motors for gates you already own, and repairs to gates that someone else fitted.

Every job begins with a free site survey, so the gate, the motor and the finish are chosen for your opening. Our engineers drive up the A12 from Chafford Hundred, and we agree a survey time with you by phone before we set off.

Book a free site survey
Finished driveway gate
Gate Services

What we install and repair in Colchester

Survey, installation, repairs and servicing from one team.

Electric and automatic gates

Automatic gates for houses, flats, yards and business units, opened by remote, keypad, intercom or phone. The electric gates in Essex hub shows how far our coverage runs.

Sliding and cantilever gates

Where a drive is short or sloping, a sliding or cantilever gate moves along the boundary and leaves your parking space clear.

Aluminium gates

Powder-coated aluminium gates do not rust and are light on the motor, which suits both period and modern frontages.

Composite gates

Composite gates give the look of timber with no staining or repainting to keep up with. The frame inside is protected against corrosion.

Driveway gates

Swing gates hung between brick piers, timber posts or a new boundary wall, measured and made for your opening. Compare layouts on driveway gates.

Automation for existing gates

If you already have manual gates, we can often fit a motor, safety devices and controls. For phone control on compatible gates, see Remootio 3.

Gate repairs

Dead motors, failed control boards, misaligned photocells, worn safety edges, sagging hinges and blocked tracks, whatever the brand. See gate repairs.

Gate servicing

Planned visits that test the safety devices, check closing forces and look after the moving parts and finish. See gate servicing.

Choosing a Gate

Which gate suits your Colchester property?

On the older roads around Lexden, the front boundary is often a brick wall or hedge with a modest gap between piers. Swing gates can look right there, provided there is room to open them inwards without catching the car. Where the garden is shallow, a slim sliding gate that runs along the wall is often the better answer.

Newer estates such as Highwoods and Mile End tend to have shorter drives, so the gate often sits close to the pavement. That puts the swing arc and the safety detection at the centre of the design, and it is where sliding gates earn their place.

Business entrances, for example around Stanway, are wider and used far more often. We choose heavier motors for them and plan vehicle loops, entry control and intercoms from the first visit. Read about sliding and cantilever gates, or compare every layout on our driveway gates page.

Sliding gate on a suburban driveway
Where We Work

Gates across Colchester and the villages

Each part of the area has its own reasons for choosing one gate over another.

Lexden

Large period houses and mature trees. Some of the older roads fall inside conservation areas, so gate height, style and materials can need checking with the council before anything is ordered. We talk this through on the survey.

Stanway

Housing sits alongside retail and trade parks here. For business entrances and yards we fit sliding and swing gates with keypads, tag readers or intercoms, and we maintain existing gates and barriers.

Highwoods and Mile End

Estates on the north side of town, where drives are often short and gates close to the pavement. We focus on safe detection, clean sight lines and gates that do not block the footway while they move.

Wivenhoe and the Colne

Close to the estuary, damp and salt in the air shorten the life of bare steel. Aluminium and well-protected composite cope better, and we check the finish at each service.

Myland, Braiswick and Marks Tey

Longer driveways and gates set back from the house are common out here. A GSM or video intercom saves the walk to the gate, and we can add one to a new or existing automatic gate.

Other villages nearby

We also cover the villages around Colchester. If you are not sure whether we reach you, call 01375 886299. Further towards the coast, see Clacton-on-Sea and Frinton-on-Sea.

Repairs and Servicing

Gates fitted by someone else

Many of the gates we are asked to look at in Colchester were installed years ago and have slowly drifted: a photocell knocked out of line, a hinge that has worn, a motor that struggles on cold mornings. We diagnose the cause, explain it in plain terms and quote before any work starts.

Gates fitted by other companies are welcome. We inspect them, test the safety devices and tell you what needs doing, and if you would like to keep the gate in good order we can put it on a servicing plan. If the gate is stuck shut right now, our manual release guides show how to open common motors by hand.

Composite driveway gate
The Process

From first call to handover

What happens on a new gate job in Colchester, step by step.

1. Call and free survey

You call or send an enquiry. We visit, measure the opening, look at the ground and posts, work out where power will come from and talk through your options.

2. Written quote

You receive a written quote covering the gate, the automation and any groundworks. You can design a gate first in our 3D configurator if you like.

3. Groundworks and making

Foundations, posts, hinges or track and cabling are prepared by our team while your gate is made to the measured size.

4. Fit and automate

The gate is hung, the motor fitted and the photocells, safety edges and controls added. Remotes, keypad or intercom are set up with you.

5. Safety testing and handover

Safety devices are tested and closing forces are measured and recorded. You are shown the manual release and given written handover paperwork.

6. Servicing

Booked visits keep the gate reliable and safe over the years. See gate servicing.

Our Services

Gate automation, repairs and design

Laser-cut aluminium driveway gate New Gates

New Gate Installation

Made-to-measure driveway gates in aluminium, composite or steel. Swing, sliding or cantilever, fitted with motors, safety devices and controls.

AluminiumCompositeSteel
Explore gate systems
Engineer repairing an electric gate motor All Brands

Repairs & Servicing

Diagnosis and repair of electric gates and barriers, from motors and boards to photocells, hinges and tracks. We take on gates other firms installed.

DomesticCommercial
Learn about repairs
3D gate configurator Design

Design Your Gate

Build an aluminium gate, pedestrian gate, fence or wall in our online 3D configurator, then send the design to us for a quote.

3D ConfiguratorBespoke
Launch configurator guide
Safety first

How we make automatic gates safe

A powered gate moves a heavy load across a driveway or entrance, so safety is built into the job from the survey onwards.

Risk assessment

We identify the crushing, shearing and impact points on your gate and decide which safety measures it needs.

Obstruction detection

Photocells watch the opening for a car, person or pet, and safety edges sense contact, so the gate stops rather than carrying on.

Force measurement

Closing force is measured with a calibrated tester and the readings are recorded against BS EN 12453, using the current on-site method in DHF TS 013-1:2025. The motor is adjusted until the gate sits inside the limits.

Handover and rechecks

At handover you are shown the manual release and the controls, and the safety devices are tested again at every service visit.

FAQs

Colchester gate questions

Questions we hear from homeowners and businesses in Colchester, Lexden, Stanway and Wivenhoe.

Yes. We install, repair and service electric gates across Colchester and the places around it, including Lexden, Stanway, Highwoods, Wivenhoe, Mile End, Myland and Marks Tey. Our engineers travel up the A12 from Chafford Hundred. Call 01375 886299 or request a quote and we will arrange a free site survey.

Often, yes. On the survey we check the gate leaves, the posts and the hinges or track, and tell you plainly whether the gate you have can carry a motor or whether replacing it makes more sense. Once automated, a gate can be opened by remote, keypad, intercom or phone. Compatible gates can be controlled from a phone with Remootio 3.

Yes. We work on any make of motor and control board, whoever installed it. Typical jobs are dead motors, failed control boards, photocells out of line, worn safety edges, sagging hinges and blocked tracks. We find the cause first, explain it and quote before we do any work. Our gate repairs page lists the faults we see most.

Often you do not, but it depends on the height and where the gate sits. As a general rule, a gate beside a road or footpath that is more than one metre high usually needs planning permission, and listed buildings and homes in conservation areas, which include some older roads in Lexden, have extra rules. Colchester City Council makes the decision, so check with its planning team before you order.

Yes. Business entrances around Stanway and elsewhere, private roads, car parks and blocks of flats are all part of our work. These sites tend to need heavier motors, more frequent servicing and some form of entry control, so we plan keypads, tag readers or an intercom into the quote from the start. See gate intercoms for the options.

Every automated gate has a manual release, and we show you how to use it when we hand the job over. If the gate stops during normal use, our manual release guides cover the common motor brands, and our repairs team can attend if the problem is more than a tripped supply.

At least once a year for a single domestic gate, and more often for busy business entrances. A service tests the safety devices, checks the closing forces and looks over the motor, hinges or track and finish. Gates are heavy machines that move by themselves, and settings drift over time. See gate servicing.

Nearby

Heading towards the coast? See our electric gates in Clacton-on-Sea and electric gates in Frinton-on-Sea pages. Further down the A12, we also cover electric gates in Chelmsford.

See all our electric gates in Essex, gate repairs and gate servicing and maintenance.

Ready for a gate in Colchester?

Get in touch for a free, no-obligation site survey and quote. We are open Monday to Friday 08:00 to 18:30 and Saturday and Sunday 09:00 to 12:00.