Services About Why Us Sectors Store Get a Quote

Electric gates and metal gate fitting in Upminster

New metal gates, gate automation, repairs and servicing in Upminster, Cranham and Corbets Tey, from a family-run team about 10 miles away in Chafford Hundred.

Metal Gates

Steel and aluminium, made to measure

Metal gate fitting is most of what we do in Upminster. We measure the opening, agree the design and then make, hang and automate the gate with our own team.

Steel gates are strong and suit traditional designs. Aluminium gates are lighter, will not rust and are easier on motors, which is why we recommend them for most automated gates. Both come powder-coated in a colour to suit the house.

As a family-run business, we keep the same people on your job from survey to handover.

Book a free site survey
Grey aluminium sliding gate on a residential driveway
Local Project

Safari cantilever gates in Upminster

One of our Upminster projects is a pair of laser-cut Safari aluminium sliding cantilever gates, fitted with matching walls, fencing and a porcelain tiled driveway. Cantilever gates hang off the ground, so there is no track to clear of leaves or grit.

See the full Safari cantilever gate project.

Homes in Upminster and Cranham range from 1930s semis near the town centre to larger detached houses towards the green belt. We design the gate around the drive you have, not a standard kit.

Safari laser-cut aluminium cantilever gates in Upminster
Services

Gate services in Upminster

From new metal gates to keeping older systems running.

Close-up of a powder-coated metal gate frame Supply & Fit

Metal Gate Fitting

Made-to-measure steel and aluminium gates, hung on new or existing piers.

SteelAluminium
Steel gates
Laser-cut aluminium gate next to a brick pier Automation

Automation Kits

Motors, photocells, safety edges and controls added to new or existing gates, with Remootio 3 phone control.

MotorsApp Control
Gate automation
Gate repair tools and parts Repairs

Repairs & Servicing

Repairs on all brands and annual servicing, from a team close by.

All BrandsServicing
Electric gate repairs
Upminster and Cranham

Electric gate installers in Upminster

We supply, fit and automate metal and aluminium gates in Upminster, Cranham and Corbets Tey, and repair and service existing gates of all brands.

Want to open the gate from your phone? We can add Remootio 3 to most gate motors, including ones we did not install, or you can order Remootio 3 to fit yourself.

Nearby: electric gate installers in Romford. See our Safari cantilever gates in Upminster or design your gate online. All areas: electric gate installers in Essex.

Upminster, not Hornchurch

Metal gate fitting and Emerson Park

This page covers Upminster, Emerson Park and Cranham. Hornchurch and Gidea Park are on our Hornchurch page.

Metal gate fitting here means supplying the leaf and automating it: swing where the drive is deep enough, sliding where Emerson Park frontages are wide but the parking sits close behind the pier.

The A127 runs between Upminster and our base. Cranham sits with Upminster. Cameras: CCTV in Upminster. UniFi: UniFi for Upminster and Havering. Servicing plans from £19.99 + VAT per month for one domestic gate, on the servicing page.

Safe by design

Built to the safety standard

Powered gates in Upminster have to meet BS EN 12453:2017+A1:2021. This is what that means in practice on your drive or site.

Tested on site

After installation or a major repair we force test the gate with calibrated equipment, so you have readings to show it meets BS EN 12453:2017+A1:2021.

Assessed for your site

No two drives are the same. We assess the hazards at your gate, from the gap at the hinges to the space behind a sliding gate, and design the safety measures around them.

Extra protection

Photocell beams and rubber safety edges give a second layer of protection, which matters most for gates near footpaths, children or pets.

After we leave

We show you how the gate works, how to release it by hand and what to check. DHF guidance in its TS 013 series sets out what owners should expect from maintenance; our servicing plans start from £19.99 + VAT per month.

FAQs

Upminster gate questions

Common questions from homeowners in Upminster, Cranham and Corbets Tey.

Yes. We supply and fit made-to-measure steel and aluminium gates, sized to your opening, as swing or sliding gates, with matching pedestrian gates and fencing if needed.

Often, yes. If the gate is straight, swings freely and the posts are sound, we can add motors, photocells and a control panel. If not, we will tell you honestly at the survey.

Upminster is in the London Borough of Havering. Gates up to 2 metres high (or 1 metre next to a highway) usually fall under permitted development, but conservation areas and listed buildings can change that, so check with Havering Council first.

Our base in Chafford Hundred is about 10 miles from Upminster by road, so surveys and repair visits are easy to arrange.

Upminster, Cranham and Corbets Tey. For Hornchurch, Emerson Park and Gidea Park see our Hornchurch gates page.

Both. We supply and fit steel and aluminium gates in Upminster, Cranham and Corbets Tey, with the posts, motors and safety devices, so one team is responsible from survey to handover. Compare steel gates and aluminium gates.

Nearby

See all our electric gates in Essex, or the nearby Hornchurch and Romford pages.

We also provide CCTV in Hornchurch and Upminster, burglar alarms and access control across Havering.

Need a gate in Upminster?

Free, no-obligation site survey and quote.