School Gates in Brentwood
Automated vehicle and pedestrian gates for Brentwood schools, built for busy drop-offs on the A128 and around Shenfield, with safety testing and records you can show at inspection.
Gates that suit Brentwood school sites
Brentwood has an unusually wide mix of schools for its size: independent and faith schools on large, historic grounds sit alongside academies and village primaries out towards Doddinghurst, Kelvedon Hatch and Ingatestone. Many of the bigger sites have several entrances, staff car parks behind period frontages and coach access for trips and fixtures.
That means a single gate design rarely fits the whole site. We often pair a heavy-duty sliding gate on the vehicle entrance with a separate pedestrian gate on a timed schedule, and keep the look in step with older brick walls and railings, which matters in Brentwood's conservation areas.
Book a school site survey in Brentwood
School gates and barriers
What we install and maintain for Brentwood schools.
Non-contact safety detection
Laser and radar detection spots people in the gate's path without anything being touched, so it is not damaged by footballs, bikes and bags in the way pressure-sensitive edges can be.
Built for automation
Most problems we see come from manual gates with a motor added later. We design or adapt gates so they are made to be automated, which removes risk before any safety device is fitted.
Timed pedestrian gates
Pupil gates can open on a timetable for drop-off and pick-up, then close and lock, with reception able to release them at any other time.
Staff car park barriers
Rising-arm barriers and sliding gates keep staff and delivery vehicles separate from pupils on foot.
Access control and intercoms
Gates can be opened by Paxton fob, keypad or a video intercom answered at reception.
Remote diagnostics
Gates connected to your network let us check faults remotely, often sorting a problem without a visit.
Gate safety in brief
As the gate owner, the school has a duty to keep powered gates safe. In practice that means a risk assessment of each gate, safety devices such as photocells, safety edges or non-contact detection kept in working order, closing forces measured and recorded with a calibrated instrument, regular maintenance by a competent engineer, records of every visit and a manual release for power cuts. We work to BS EN 12453 and DHF guidance on every school gate.
Read the full plain-English guide: gate safety rules for schools.
One contractor for the whole site
Most Brentwood schools need more than one system, and they work better when they are planned together.
Access control and intercoms
Paxton fobs, video intercoms at reception and lockdown from one place. See school access control in Brentwood and access control in Brentwood.
CCTV
Cameras on entrances, car parks and blind spots, set up with privacy and GDPR in mind. See school CCTV in Brentwood and CCTV in Brentwood.
Fire detection and alarm
Schools use fire detection and alarm systems designed to BS 5839-1:2025, the current code of practice for non-domestic buildings. Your fire risk assessment sets the level of cover. A competent person should design, install and commission the system, site staff should test it each week, and a competent engineer should service it at six-monthly intervals, with everything written in the logbook. See school fire alarms in Brentwood and fire alarms in Brentwood.
Door entry and visitor intercoms
Video or audio stations so reception can see, speak to and release a visitor. See school door entry in Brentwood.
IT and network integration
Gates, door controllers, intercoms and cameras all depend on the school network. We plan them with your IT team or provider, keep security devices on their own network segment and run the data cabling and WiFi ourselves, so one team owns the whole job.
School hubs: school gates, gate safety rules for schools, access control for schools, CCTV for schools, fire alarms for schools and door entry for schools.
Maintenance and safety records
Every visit is recorded: safety device checks, measured closing forces, faults found and work done. You get a copy for your premises file, so the gate's history is ready when inspectors, insurers or your trust ask for it. We hold CSCS cards, SafeContractor accreditation, ISO 9001 certification and enhanced DBS clearance. See our accreditations.
See how this works on real school sites: our primary school gates in Ilford and secondary school gates in Stanmore case studies. Local pages: gates in Brentwood, CCTV in Brentwood and nearby Shenfield, Hutton Mount, Ingatestone.
School Gates in Brentwood
Common questions from Brentwood school business managers, premises teams and headteachers.
Often, yes. Where the frontage is sensitive we look at below-ground or discreet motors, colour-matched finishes and keeping the existing railings where they are sound. Planning permission is the school's decision with the council, and we can provide drawings and product details to support an application.
Yes. Pedestrian and vehicle gates can open automatically at set times, such as before school, at lunch for site staff and at home time, then close and lock again. Reception can still release the gates by intercom or fob outside those times.
The school, as the owner or operator of the gate, has a duty under health and safety law to keep it safe. In practice that means a risk assessment, working safety devices, measured closing forces, regular maintenance by a competent engineer and records of each visit.
Yes. We inspect the gate, test the safety devices and forces, and give you a written report of anything that needs doing before adding it to a maintenance plan.
Talk to us about Brentwood schools
Book a free site survey for your Brentwood school, or call us to talk it through.