Services About Why Us Sectors Store Get a Quote

Aluminium Gates in Brentwood

Bespoke aluminium driveway gates for Brentwood, Shenfield and Hutton Mount, including swing, sliding and cantilever designs. We survey from our base in Chafford Hundred, about ten miles along the A127.

Aluminium gates in Brentwood

Shenfield, Hutton Mount and the town itself

Brentwood sits between the A12 and the A127, with the town centre, Shenfield and Hutton Mount each asking something different of a driveway gate. Larger plots towards Shenfield and the green edge often have the width for a statement pair of swing leaves, or for a farm-style aluminium cantilever that runs clear of the drive. Closer into town, openings are tighter and a sliding leaf that tucks beside a wall or hedge is usually the more practical choice.

A published example on this side of the borough is our farm-style sliding cantilever gate in Shenfield. The leaf is aluminium, the opening was excavated as part of the same job, and the gate was linked to a Control4 system already in the house. We use that project at survey as a worked example, not as a catalogue item to copy. Every opening, slope and cable route is measured on site.

We also cover the surrounding roads towards Hutton Mount and Ingatestone. For electric gates in the wider town, including repairs and other materials, see electric gates in Brentwood. This page is for aluminium leaves only.

See the Shenfield case study
Farm-style aluminium sliding cantilever gate in Shenfield, near Brentwood
Why aluminium here

A light leaf that still looks like an estate gate

Many Brentwood drives want the look of a traditional five-bar or boarded estate entrance without the upkeep of timber, or the weight of a heavy steel leaf on the hinges and motor. Aluminium can be TIG-welded as a framed estate gate, powder-coated in a chosen RAL colour, or laser-cut as a more contemporary panel. Because the leaf is light, it puts less strain on the operator, which matters on a long or frequently used entrance.

Where the drive is short, or a swing leaf would sit on a slope, we look at a sliding or cantilever aluminium gate instead. Cantilever leaves do not need a track in the road surface, which is useful where the entrance is shared or already finished in block paving. The right layout is decided at survey, not from a photograph.

You can sketch styles, colours and pedestrian-gate matches in our online gate configurator, then we check the design against the opening we measure on site. Ranges and finishes are also set out on the aluminium gates in Essex hub.

Aluminium gates across Essex
Executive-range aluminium estate gate with a framed, powder-coated finish
From survey to handover

How we install a gate in Brentwood

Work in Brentwood is planned from our workshop in Chafford Hundred. A survey visit is free, and we group nearby jobs on the A127 when we can.

Site survey

We measure the opening, the fall of the drive, the room for a sliding or cantilever run-back, and the power supply. If you already have Control4 or another platform, tell us at this visit so the interface can be designed with the gate, not added later.

Design and manufacture

Leaves are made to the measured width and height. We agree the infill, the colour and whether a matching pedestrian gate or fence panel is part of the same job.

Groundworks and automation

Posts, tracks or cantilever foundations, ducts and the motor are installed as one piece of work. We do not hand the groundworks to a separate contractor and hope the operator still lines up.

Safety checks and handover

Before we leave, the gate is force tested and the safety devices are checked. You receive the risk assessment, the force-test record and the user instructions. Closing forces are measured and recorded against BS EN 12453 and DHF TS 013-1:2025. A competent person must design, test, commission and sign the installation off.

After handover, gate servicing keeps the photocells, edges and operator in working order. If an existing aluminium gate in Brentwood has stopped, we can often take that as a repair visit.

Nearby aluminium projects

Work you can look at first

The closest published aluminium job is the Shenfield farm-style cantilever already mentioned. A little further east, in Upminster, we installed Safari laser-cut aluminium cantilever gates with new walls, fences and a porcelain tiled driveway.

For Chelmsford examples of aluminium swing leaves, see the anthracite postless swing gates and the horizontal boarded gate with a perspex top. Those two jobs also show how we widen an opening when a single-car entrance is no longer enough.

Other Essex towns

Aluminium gates nearby

Local aluminium pages also cover Romford, Grays, Basildon, Chelmsford and Southend-on-Sea. The Essex aluminium gates hub is the starting point if your town is not in that list.

For swing and sliding layouts in general, see driveway gate types and sliding gates.

Brentwood questions

Common questions about aluminium gates in Brentwood

Yes. Shenfield and Hutton Mount are part of the same patch as Brentwood town. The Shenfield cantilever case study is one published example. Hutton Mount often has wider frontages on a private road, so the survey looks carefully at run-back and how visitors are let in.

When a swing leaf would climb a slope, block a parked car, or open out towards the road. A cantilever leaf hangs from a foundation beside the opening and does not need a track in the driveway, which suits some already-finished Brentwood and Shenfield entrances. We confirm it on site.

Yes, where the house already has Control4, as on the published Shenfield job. We agree at survey who configures each interface and what still works if the internet is down. The safety devices on the gate are separate from the smart-home controls and stay in place.

Request a survey through our sales form or call 01375 886299. We measure the opening and quote for the gate that fits it. Starting figures for aluminium gates in Essex are on the county hub; we do not quote a Brentwood job from a photograph alone.

Ready for aluminium gates in Brentwood?

Book a free survey and we will measure the opening, the ground and the power supply, then quote for a gate that fits the drive.