Aluminium Gates in Chelmsford
Aluminium driveway gates for Chelmsford, Springfield, Great Baddow, Galleywood, Writtle and Danbury, with two published aluminium swing-gate projects already in the city.
Two projects in the city, and a survey for yours
Chelmsford is about 25 miles from our base in Chafford Hundred, reached via the A12. The city has a wide range of entrances: newer properties in Springfield and the northern estates, period frontages around the cathedral quarter, established drives in Great Baddow and Galleywood, and longer rural plots towards Writtle and Danbury. The growing edges of the city are surveyed in the same way as the centre: the opening in front of us, not a standard city width.
Two published jobs already sit in Chelmsford. One is a pair of full boarded anthracite aluminium swing gates with a postless design and underground automation, widening the driveway opening from 2.8 m to 3.15 m. The other is a horizontal boarded aluminium gate with a perspex top panel, where the drive was widened from a single-car entrance to a two-car entrance, with matching gate lights and the groundworks done as part of the same job.
Those pages are the best starting point if you want to see what the metalwork and the finished opening look like. For electric gates of every material, see electric gates in Chelmsford. This page stays with aluminium.
See the anthracite Chelmsford case study
Some Chelmsford jobs start by widening the entrance
Both published Chelmsford projects had to change the opening, not just hang a new leaf on the old posts. That is common where a single-car entrance now has to take two cars, or where a post in the middle of the drive has become a nuisance. A postless aluminium swing pair, as on the anthracite job, can leave the opening clear once the leaves are parked. It is only the right answer if the ground and the underground operators will support it, which is a survey decision.
Where the drive is short, or the leaves would climb a slope, we look at sliding or cantilever aluminium instead. Writtle and Danbury plots are often longer and will take a more traditional swing pair, sometimes with a matching pedestrian gate and a stretch of fencing in the same powder coat. You can explore styles in the configurator before we visit.
Intercoms and cameras should be planned with the gate on remote or rural entrances, rather than added after the leaves are hanging. We treat those as part of the same design.
See the boarded Chelmsford case study
From the A12 to a finished entrance
We travel up from Chafford Hundred and plan Chelmsford surveys around other work in the city and the surrounding villages when we can.
Survey the opening you actually have
We measure the width, the room to swing or slide, the fall of the drive and the power supply. If the entrance needs widening, as on both published Chelmsford jobs, that is costed and designed with the gate, not left as a builder's extra.
Design the leaves against those measurements
Boarded, perspex-topped, estate or laser-cut aluminium are all possible. The two city case studies are references, not a shortlist you have to pick from. Colour, pedestrian gates and lighting are agreed before manufacture.
Groundworks and automation in one sequence
Underground operators, posts, ducts and any widening of the entrance are done by the same team. That is how the anthracite pair could be postless, and how the boarded gate could become a two-car entrance with the lights in the right place.
Safety records at handover
We fit the safety devices the risk assessment requires, then measure and record closing forces against BS EN 12453 and DHF TS 013-1:2025. A competent person signs the installation off, and you keep the paperwork.
After handover, servicing keeps the operators and safety devices in working order. Repairs are available if an existing Chelmsford gate has stopped.
Both case studies are in the city
Read the anthracite aluminium swing gates and the horizontal boarded perspex gate for the photographs, the widths and the groundworks. Further out, the farm-style cantilever in Shenfield and the Safari cantilever in Upminster show aluminium sliding leaves rather than swing pairs.
Aluminium gates south of the A12
Other aluminium town pages cover Brentwood, Basildon, Romford, Grays and Southend-on-Sea. The aluminium gates in Essex hub lists the ranges and the county picture.
Questions about aluminium gates in Chelmsford
Yes. There are two published projects in the city: the anthracite postless swing gates, which widened the opening from 2.8 m to 3.15 m, and the horizontal boarded gate with a perspex top, where the drive was widened to a two-car entrance. Both have their own case-study pages.
Yes. Those places are part of the same Chelmsford patch. Writtle and Danbury often have longer drives; Springfield and the northern estates are more mixed. We survey each entrance rather than assuming a city-centre layout.
A pair of leaves with no centre post in the driveway, usually run by underground operators, so the opening is clear when the gates are open. The anthracite Chelmsford job is an example. It only works where the ground and the operators can support it, which we confirm at survey.
Book a free survey through the sales form or on 01375 886299. Starting figures are on the Essex aluminium gates page. A Chelmsford quote is written after we have measured the opening, including any widening.
Ready for aluminium gates in Chelmsford?
Book a free survey. We can talk through the two published Chelmsford projects, then measure your own opening and quote for a gate that fits it.